FRAQ NETWORK • DRIVER & FLEET RESOURCES

Semi Truck Fault Codes: SPN & FMI Guide

A fault code is the starting point. Understand what the truck is reporting, collect the right details, and find the correct diagnostic path before spending money on parts.

Search documented code examples, decode FMI numbers, or jump to official resources for Cummins, Detroit, PACCAR, Volvo, Mack, International and Caterpillar engines.

Read the whole code before you troubleshoot

SPN identifies the reported parameter

The Suspect Parameter Number points to the value or condition the controller reports. It does not prove a named part is defective. A separate manufacturer fault number or P-code uses a different numbering system.

FMI identifies the failure category

The Failure Mode Identifier describes how the reported value failed a check. A high-voltage circuit code is different from a valid temperature reading that is too high.

Write down the SPN, FMI, source address or module, active/inactive status, occurrence count, warning lamps, VIN and engine serial number. Include related codes and when the issue started. Legacy J1587 displays may use MID/PID/SID rather than SPN; do not interchange those numbers.

SAE reference for J1939 assignments · Cummins engine-specific service information

EXACT-CODE CHECK

SPN 5346 FMI 0: verify the number and reporting module

Engine-specific meaning and repair are not verified in this guide. If your display shows SPN 5346 FMI 0, save a photo of the full message, source address and warning lamps. Ask a qualified technician to confirm the definition for that vehicle before testing or replacing parts.

Do not silently change the number to SPN 5246 FMI 0. That different code is documented in an International SCR inducement bulletin. A manufacturer’s standalone “fault code 5346” is also not automatically J1939 SPN 5346.

FMI 0 generally describes valid data beyond the high operating limit at the highest severity category. It does not identify the failed system by itself or establish a universal safe-to-drive decision.

Find a diesel diagnostic provider

Manufacturer reference for the different code SPN 5246

FMI 0–31: failure-mode meanings

Use these categories with the SPN and OEM definition. Severity words describe the reported range; they do not replace the vehicle’s warning-lamp instructions.

FMI 0Valid data above range; highest severity
FMI 1Valid data below range; highest severity
FMI 2Erratic or inconsistent data
FMI 3Circuit voltage too high
FMI 4Circuit voltage too low
FMI 5Current too low or open circuit
FMI 6Current too high or grounded circuit
FMI 7Mechanical response incorrect
FMI 8Signal frequency, width or timing abnormal
FMI 9Updates arriving abnormally
FMI 10Unexpected rate of change
FMI 11Cause not identified
FMI 12Intelligent component fault
FMI 13Calibration needed
FMI 14Follow special instructions
FMI 15Valid data high; lower severity
FMI 16Valid data high; moderate severity
FMI 17Valid data low; lower severity
FMI 18Valid data low; moderate severity
FMI 19Incoming network data erroneous
FMI 20Signal drifting upward
FMI 21Signal drifting downward
FMI 22Reserved; consult the applicable definition
FMI 23Reserved; consult the applicable definition
FMI 24Reserved; consult the applicable definition
FMI 25Reserved; consult the applicable definition
FMI 26Reserved; consult the applicable definition
FMI 27Reserved; consult the applicable definition
FMI 28Reserved; consult the applicable definition
FMI 29Reserved; consult the applicable definition
FMI 30Reserved; consult the applicable definition
FMI 31Condition detected

Manufacturer FMI reference table

ENGINE-SPECIFIC INFORMATION

Find the correct diagnostic and repair information

Truck badge and engine manufacturer may differ. Match the installed engine, serial number, emissions family and module before applying a procedure. Some official tools and service libraries require an account or subscription.

Cummins

ISX / ISX15, X12, X15 and other electronically controlled engines

Use QuickServe with the engine serial number; INSITE supports detailed fault diagnosis.

Official Cummins resources →

Detroit

DD13, DD15, DD16 and legacy Series 60 / MBE

Match the engine generation and emissions family to current Detroit service literature and the appropriate diagnostic tool.

Official Detroit resources →

PACCAR

MX-11 / MX-13 and PX engines

Choose the actual engine family. PACCAR MX Access includes DAVIE4 and repair information; PX coverage follows its own tooling.

Official PACCAR resources →

Volvo

D11 / D12 / D13 / D16

Use the VIN, engine and emissions family with Volvo service information and guided diagnostics.

Official Volvo resources →

Mack

MP7 / MP8 / MP10 and legacy applications

Use Mack service information and the diagnostic tool appropriate to the truck generation.

Official Mack resources →

Caterpillar

Legacy on-highway C7 / C9 / C12 / C13 / C15 and 3406E

Use the engine serial prefix and current Cat service information; identify whether the display is a diagnostic or event code.

Official Caterpillar resources →

What a proper diagnosis and fix should include

  1. Capture before clearing: save the fault list, status, snapshots and driver observations.
  2. Confirm applicability: use the correct OEM tree for the engine and control-module software.
  3. Test the cause: a qualified technician checks the relevant power, ground, wiring, sensor, fluid or mechanical conditions using specified equipment.
  4. Repair what failed the test: avoid replacing multiple parts by guesswork or treating an inducement code as the original fault.
  5. Verify the result: complete the OEM verification routine, confirm normal data, and check that the cause and related codes are resolved.

Can I keep driving with a code?

There is no universal yes/no answer from an SPN alone. Follow the warning lamps, operating symptoms and vehicle manual. Have a qualified technician advise on the exact fault and operating condition.

Will clearing the code fix it?

Clearing a record does not repair its cause. Record diagnostic evidence first. Some faults, derates and aftertreatment conditions require a successful OEM test or recovery sequence after repair.

Need help with the truck?

FRAQ Network helps drivers and fleets find independently listed trucking service businesses. Confirm the provider’s location, engine-tool coverage, availability and pricing directly.

FOR DIESEL SHOPS & SERVICE PROVIDERS

Advertise your business on FRAQ

Help drivers find your diesel shop, mobile repair business or truck service. Add accurate services, coverage, contact information and photos.

List my diesel shop / business →