Understand water-to-product versus product-to-water ratios, finished batch size, and mixed-gallon cost. Use FRAQ’s labeled dilution and wash-job calculator.

A ratio written as “4:1” is incomplete until you know which number means water and which means product. Reversing those labels changes both the product quantity and the cost of the batch.
Quick answer: For four parts water to one part product, there are five total parts. Product is one-fifth of the finished batch. For four parts product to one part water, product is four-fifths. Read the manufacturer’s order of terms before mixing.
Open the dilution and wash-job cost calculator. Its fields explicitly say water parts and product parts, so there is no unlabeled ratio to interpret.
Simple Green’s industrial FAQ states that its ratios put cleaner first and water second. That is why you should read the instructions for the particular product rather than assuming the first number always means water. The FAQ is evidence about that manufacturer’s notation, not a mixing instruction for every cleaner.
With four water parts and one product part, a five-gallon finished batch contains one gallon of product and four gallons of water. At an illustrative $12 per gallon of concentrate, the chemical portion costs $12 for the batch, or $2.40 per finished gallon. Water, containers, losses, and labor are additional costs.
If the ratio means four product parts and one water part, the same five finished gallons contain four gallons of product and one gallon of water. At the same example product price, chemical cost becomes $48 for the batch, or $9.60 per finished gallon. The ratio labels matter more than the order in which the numbers are typed.
“Make five gallons total” and “add concentrate to five gallons of water” describe different quantities. For a four-water-to-one-product mix starting with five gallons of water, the arithmetic product quantity is 1.25 gallons and the nominal finished volume is 6.25 gallons.
The FRAQ calculator takes a finished batch size. Do not enter the water already in a tank as the finished size. Follow the product instructions for mixing order, suitable containers, and whether nominal volume addition is appropriate for that product.
A downstream injector or proportioner may introduce additional water. Hose configuration, operating pressure, the injector, and the application equipment affect actual draw. The calculator does not infer injector draw or certify an applied concentration.
Use the equipment maker’s instructions and a suitable measured draw test for the installed system. Keep the tank ratio and equipment draw as separate records. If you do not know the draw, do not present a tank calculation as an exact surface concentration.
Measure the mixed solution used on representative units. If an example unit uses 0.2 gallon of a $2.40-per-gallon batch, its chemical component is $0.48. A bigger unit, heavier buildup, rework, or a different application method changes usage. Record those differences instead of assuming one draw figure covers every job.
Use the wash-job section of the calculator to add labor, water, travel, and allocated overhead. This same parts-based arithmetic can help janitorial, detailing, pressure-washing, and maintenance businesses when a product label permits dilution with water.
Use only manufacturer-authorized dilution instructions. The tool performs volume and cost arithmetic. It does not recommend a chemical strength, determine surface compatibility, or authorize mixing different chemicals.
These examples come from the services listed in FRAQ profiles. Confirm service area, current availability, scope, access, and pricing directly.
Search more providers near your route. Independent businesses set their own prices and accept their own jobs.
Sources checked November 15, 2026. Worked examples are illustrative inputs, not FRAQ provider quotes or promises of savings.