Estimate semi-truck idle fuel cost with a transparent formula, DOE planning assumptions, and editable fleet examples. Connect to FRAQ’s free calculator.

Idling is easy to overlook because the truck does not add miles. Fuel still leaves the tank. To estimate that expense, multiply actual idle hours by gallons per hour and your fuel price, then repeat the calculation for the vehicles and days you are evaluating.
Quick answer: Idle fuel cost = hours × gallons per hour × dollars per gallon. Use your ECM, telematics, or measured operating records when available. A planning default is a starting point, not a measurement of your engine.
Open FRAQ’s detention and idle-cost calculator to enter your own truck or fleet assumptions.
The Department of Energy’s Alternative Fuels Data Center uses 0.8 gallon per hour as its default for heavy-duty diesel idling in its Petroleum Reduction Planning Tool methodology. That default cites earlier research. It should not be described as the exact consumption of every modern truck.
Engine load, accessories, ambient conditions, and operating settings can change your result. A smaller service vehicle, an auxiliary power unit, and a refrigeration unit are different systems. Keep their fuel records separate rather than applying the tractor assumption to all three.
At an illustrative 0.8 gallon per hour and $4 per gallon, four idle hours use 3.2 gallons and cost $12.80 per truck. Repeating that scenario for 20 days gives $256 per truck. For five trucks on that same schedule, the fuel-only scenario is $1,280.
Those numbers do not include payroll, maintenance, financing, or lost work. They also do not establish that every idle hour can safely be removed. The calculator shows the inputs so a fleet can replace them instead of treating an example as a promised savings figure.
A maintenance defect, unusual accessory load, or a different route can make two weeks difficult to compare. Ask a qualified technician about a change in engine behavior instead of assuming a new fuel figure proves a driver-performance issue.
If you are comparing hotel parking, shore power, or an APU, enter the alternative’s real cost and operating limitations separately. Do not claim that an alternative is free simply because the tractor engine is off. Purchase costs, electricity, APU fuel, and service can matter.
Do not add an idle-fuel line to a cost estimate that already includes that same fuel. The detention tool deliberately shows a potential time-based invoice and the idle fuel expense as different results.
Driver rest, safe temperatures, carrier procedures, emissions-system requirements, and cargo conditions remain part of the decision. This guide does not direct drivers to shut down equipment when doing so would compromise safety or the load. Confirm operating and idle-reduction procedures for the actual vehicle.
These examples come from the services listed in FRAQ profiles. Confirm service area, current availability, scope, access, and pricing directly.
Search more providers near your route. Independent businesses set their own prices and accept their own jobs.
Sources checked November 15, 2026. Worked examples are illustrative inputs, not FRAQ provider quotes or promises of savings.